Aluminium Composite Panels for Signage and Cladding - Ulltrasign
Ulltrasign aluminium composite panels are widely used for display, signage, as signboards and for advertising panels.
Ulltrasign panels have a three layer composite structure. Thee top and bottom layers are covered with Aluminium sheet (standard thickness 0.30mm), the central core is low density polyethelene, The panel is painted in the colour of choice.
Ulltrasign Features:
- Easily maintained, flat, lightweight panels with a surface enables precise printing
- High strength - excellence in sound and heat insulation
- Resistant to both acids and alkalis and easily maintained
- Outstanding colour and gloss retention in a wide range of hues
- Easily fabricated and with good flexibility to fit various designs
Ulltrasign Applications:
- Signboard usage and advertising boards
- Interior decoration
- Cladding
- Industrial usage
Ulltrasign Colour Options:
- Standard colours - see chart below - sample swatches available
- Customer's secial colours are available - minimum quantity applies
- Surface paint can be matt or gloss
- Top and bottom sheets both painted / or
- One side can be painted, the reverse side in mill finish
Ulltrasign Panel Colour Range
Technical Data and Panel Sizes:
- Panel thickness 4mm - other thicknesses on request, minimum quantity applies
- 4 x 1220 x 2440
- 4 x 1500 x 3000
- 4 x 1500 x 3600 - other sizes on request, minimum quantity applies
- Aluminium skin thickness: 0.30mm, 0.20mm, 0.15mm
- By means of a knife at 90° bevel angle, the right angle configuration containing an inner angle r=3mm can be manufactured
- The acute angle (45°) configuration containing an inner angle r=2mm can be manufactured by means of a knife at 135° bevel angle
- The right angle (45°) configuration containing an inner angle r=7mm can be manufactured by means of a knife at a flat angle
Remarks:
- Grooving and bending process environment temperature is over 20°
- The exterior aluminium skin should be visible through the polyethelene core at the valley of the rout. V grooving bottom should not reach the back of the aluminium skin and leave about 0.2 - 0.4mm of polyethelene core. Extreme care should be taken not to touch the exterior aluminium skin with the blade. Slight variation can occur due to the thickness changes in the sheet; constant depth of the rout ensures a smooth line when the edge is folded
- By grooving only one side, the sheet can either be bent upward or downward to create either an inside or outside corner
- Note that as a result of the slight radius produced when bending, your finished panel dimensions will be 2 - 4mm larger.
Download pdf of brochure of signage panels
|
 |
|
||||||||||||||||||||||||
Aluminium Castings - Aluminium Extrusions - Aluminium Finishes - Aluminium Ladders, Commercial - Building Products Division - Cladding, Wintec UlltraClad® - Decorative Metals - Download Brochures - Extruded Aluminium Bends - Fabricated Aluminium - Fasteners - Machinery, Tekna - Marine Products - Sheet, Plate & Rollformed Aluminium - Welding Products - Wintec UlltraClad® Cladding -
Company Profile - Contact Details - Sales Centres - News - Specials - Interesting Links - Home - TOP
